Suzuki RA410 Manual page 580

1
2
3
1
DISASSEMBLY
1) After Removing snap ring, remove all plates (retaining plate, fric-
tion plates, separator plates and cushion plates) from input shaft
(1).
2) Using special tool, push down spring retainer and remove snap
ring.
CAUTION:
Do not push down spring retainer more than necessary.
Special Tool
(A) : 09926-98350
3) Blow air (1) into oil hole (2) in input shaft (3) and remove piston.
1
4) Remove oil seal rings (2) from piston (2).
INSPECTION
Check if check valve (1) moves freely.
Blow air (2) into check valve to check for clogging.
2
AUTOMATIC TRANSMISSION 7B-53