OIL STRAINER
1) Drain transmission fluid.
2) Remove oil pan.
3) Remove oil strainer (1).
4) Clean oil strainer.
5) Install oil strainer (1) to lower valve body (2).
Tightening Torque
.
(a): 8 N
m (0.8 kg-m) (5 mm bolt)
.
(b): 3 N
m (0.3 kg-m) (6 mm bolt)
6) Reinstall oil pan and refill transmission fluid.
7) Upon completion of installation, warm up transmission and
check for fluid level and leakage. (Refer to "Fluid Level".)
THROTTLE POSITION (TP) SENSOR
Refer to "ENGINE AND EMISSION CONTROL" section.
AUTOMATIC TRANSMISSION 7B-27