Suzuki RA410 Manual page 645

1
1
1
1
REMOVAL
1) Detouch inside handle bezel (1).
2) Remove door mirror bezel.
3) Remove door inside pull handle case fitting screw.
4) Remove window regulator handle (1) (if equipped).
For its removal, pull off snap by using a cloth (2) as shown in left
figure.
2
5) Remove door trim.
With inside handle bezel tilted as shown in figure, turn door trim
90 counterclockwise to remove it.
And disconnect power window switch lead wire at coupler (if
equipped).
6) Remove door inside pull handle bracket (1).
7) Remove door sealing cover (2).
2
8) Remove door outside weatherstrip (1).
Lower window all the way down. Then, use a tape-wrapped
putty knife (or screwdriver) to pry off weatherstrip.
CAUTION:
Use a tape-wrapped putty knife (or screwdriver) to pry
off weatherstrip. Use of an unwrapped tool will cause
damage to painting.
BODY SERVICE 9-3