Suzuki RA410 Manual page 661

HOOD
INSPECTION
Check that secondary latch operates properly (check that second-
1
ary latch keeps hood from opening all the way even when pulling
hood release handle inside vehicle.) Also check that hood opens
and closes smoothly and properly and hood locks securely when
closed.
If any malfunction is found, lubricate hinge and latch, or repair hood
lock system.
ADJUSTMENT
2
(a)
(a)
Fore-and-aft and right-and-left adjustment.
Loosen four mounting bolts (1) for adjustment.
Hood lock adjustment
When installing hood lock, hold hood lock at the lowest position
and tighten bolts. If necessary, move it in vertical direction for ad-
justment.
Tightening Torque
(a): 10 N·m (1.0 kg-m, 7.5 lb-ft)
Vertical adjustment
If only one side (right or left) of hood is not level with front fender,
make it level by tightening or loosening hood cushion (2).
BODY SERVICE 9-19