Suzuki RA410 Manual page 565

7B-38 AUTOMATIC TRANSMISSION
2
1
9) Remove clip (1) from solenoid terminal (2) and push solenoid
10) Remove bolt (1) and then oil cooler (2).
1
2
11) Place transmission unit with oil pan side facing up. Remove oil
12) Remove magnet from oil pan and remove sealing material at-
13) Remove oil strainer mounting bolts and remove oil strainer (1).
14) Remove valve body mounting bolts and remove valve body as-
terminal into case.
Remove oil filler tube.
pan mounting bolts, tap around oil pan lightly with plastic ham-
mer and remove it.
CAUTION:
Be careful not to hit oil pan hard with a plastic hammer.
Oil pan may get deformed.
Do not pry against mating surface of oil pan with a
screwdriver.
tached on mating surface of oil pan.
CAUTION:
Remove residual sealing material on mating surface
completely.
Clean carefully so that none of sealing material remains
inside of oil pan.
sembly (2).
CAUTION:
Be careful not to let manual valve fall off when removing
valve body assembly.