Radiator - Suzuki RA410 Manual

1
2
1
1
1
(a)
3
Tightening Torque N·m (kg-m, lb-ft)
(a): 23 (2.3, 17.0)
(b): 50 (5.0, 36.5)

RADIATOR

REMOVAL
1) Disconnect negative cable at battery.
2) Drain cooling system by loosening drain plug (1) of radiator.
3) Disconnect coupler of cooling fan motor.
4) Remove front bumper (see SECTION 9).
5) Remove air cleaner case and air intake hose (see SECTION
6) Remove A/C condenser mounting bolt (1) (if equipped) and ra-
7) Disconnect radiator inlet and outlet hoses and reservoir tank
8) Disconnect radiator fan wire harness at connector.
9) Detach receiver/dryer (1) from radiator.
10) Hang A/C condenser with wire hook or the like so as to prevent
11) Remove left side stabilizer bracket (1), stabilizer mount brack-
12) Remove raditor (4) with cooling fan motor.
(b)
1
4
2
(b)
6A4).
diator bolts (2).
hose from radiator.
A/C hose from bending or twisting excessively or being pulled.
et (2) and jack up point bracket (3) from vehicle body.
ENGINE COOLING 6B-11