Spindle, Standby Display - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
9 Machining a Workpiece
Note
(1) Due to the specifications issued by MTB, pressing the menu [Load meter] without setting ON load meter display causes
an error.

9.2.11 Spindle, Standby Display

Monitr
Sp-stby
The current spindle tool No. and the standby tool No. (a maximum of 4 tools) are displayed.
Display items
Display items
(1) Spindle standby
(2) Tool No.
(3) -D
Menus
Menus
This closes the pop-up window and quits this function.
Close
This item is not displayed.
This displays No. of the tool that is attached to the spindle or standby position in the
magazine 1.
For D data function and purpose, refer to the instruction manual issued by the MTB.
309
Details
Details
(2)
(3)
(1)
IB-1501453-C