Mitsubishi Electric C80 Series Instruction Manual page 126

C80 Series Instruction Manual
4 Inputting and Outputting a Machining Program
(*1) Some items may not be displayed depending on the device.
○: Displayed ×: Not displayed
Display item/Device
Number of programs registered
Remain
Number of memory characters
Remain
List
(*2) When the device is not mounted, a registration count and a memory capacity are not displayed and an empty list is
displayed.
Note
(1) As for the device and directory, the setting values are retained even when the power is turned OFF. However, by se-
lecting directory, when the number of characters in the directory path (full path) from the root directory exceeds 100, the
directory path is not retained, but a previously set directory path containing 100 characters or less retained.
When the device is "Memory", the initial directory display is "Program".
Menus
Menus
This sets the device, directory and file name for which input/output operations are performed.
File
set
This copies the file in file setting column A (transfer origin) to the file setting column B (transfer destina-
Transfr
tion). (The transfer origin file is not changed.)
A  B
This copies the file in file setting column B (transfer origin) to the file setting column A (transfer destina-
Transfr
tion). (The transfer origin file is not changed.)
B  A
This compares the files in file setting column A and file setting column B.
Compare
A:B
This erases the selected file in file setting column.
Erase
This changes the name of the file in file setting column A to that of in file setting column B.
Rename
A  B
<Note>
The same device must be selected for A and B.
This creates a new directory in the selected file setting column.
Dir
The directory can be created when the memory card or the USB memory is selected for the device.
create
This adds the contents of the file in file setting column B to that of in file setting column A. (The file in
Merge
file setting column B is not changed.)
B  A
This closes the pop-up window and quits this function.
Close
This interrupts the process (transfer, compare, etc.) during its execution.
Stop
Switching the valid area
It is necessary to enable the areas including device, directory, and file name in the file setting column A or B in order to set
those items.
Change the display area using the [←], [→], direction cursor keys or the [|←], [→|] tab keys.
For the touchscreen display, it is also possible to change the invalid area by touching the display area.
Memory Memory2
○ ○
○ ○
○ ○
○ ○
○ ○
Details
101
Memory card USB memory
○ ○
× ×
○ ○
○ ○
○ ○
IB-1501453-C