Mitsubishi Electric C80 Series Instruction Manual page 367

C80 Series Instruction Manual
9 Machining a Workpiece
Operation method
During a single block stop or when a program error stop occurs, the buffer can be corrected with the following operations,
and operation can be continued.
The normally executed program appears in the buffer correction area.
(1) Press the main menu [Prg correct].
(2) Correct the program with the same method as a nor-
mal program editing.
(3) Press the [INPUT] key.
(4) Confirm that the corrected data is correct, and then
restart.
IB-1501453-C
Previous command
Command in execution
Next command and
subsequent commands
The mode changes to the buffer correction mode.
Previous command
Command in execution
Buffer correction area (white portion）
Next command and subsequent commands
The display changes so that the next command is at the
head of the area. The buffer correction area becomes
the valid area, and the keys can be input or the cursor
moved.
The cursor can be moved freely within the buffer correc-
tion area using the cursor keys.
The buffer correction mode ends, and the corrected data
is written into program.
If a program error has occurred, the error display is
erased.
The program execution resumes from the currently
stopped position.
342
16 lines