Deleting The Tool Management Data - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
5 Setting a Tool and a Workpiece

5.5.9 Deleting the Tool Management Data

Deleting the tool management data in [List view]
Method 1: Delete the tool management data of the cursor line.
(1) Display the tool management screen.
(2) Use the [↑] or [↓] key to move the cursor onto the line
to be deleted.
(3) Delete the selected data.
Menu [Tool clear] [INPUT]
(4) Press the [Y] or [INPUT] key.
To cancel the erasing, press a key other than [Y] or
[INPUT].
Method 2: Delete the tool management data of the designated line.
(1) Display the tool management screen.
If the details of tool management data is displayed,
press the menu [List view] and switch to the display
of tool management data list.
(2) Press the menu [Tool clear].
(3) Specify the line clear range, by separating the first
and last data numbers by a slash (/) from each other,
and press the [INPUT] key.
1/5 [INPUT]
To delete data down to the last line, set "E".
(Example) 5/E:
(4) Press the [Y] or [INPUT] key.
To cancel the erasing, press a key other than [Y] or
[INPUT].
Note
(1) If a value outside of the clear range is specified, the operation message "Setting error" is displayed.
The tool management data list is displayed.
Press any key except [Y] and [INPUT] keys to cancel.
Once deleted, the data is empty.
The tool management data list is displayed.
The tool management data, that corresponds to the des-
ignated data number, is cleared and highlight of the
menu display is released.
Data of the cleared range is empty.
177 IB-1501453-C