Erasing The Coordinate System Offset Amount; Setting The Workpiece Coordinate Origin - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
5 Setting a Tool and a Workpiece

5.8.2 Erasing the Coordinate System Offset Amount

Operation method (Erasing the coordinate system (excluding G92) offset amount where the cursor is displayed for
all axes.)
(1) Press the menu [All axs clear].
(2) Press the [Y] key.
Operation method (Erasing all axis offset data of all coordinate systems (excluding G92 and EXT))
(1) Press the menu [All clear].
(2) Press the [Y] key.
Note
(1) G92 data cannot be erased.

5.8.3 Setting the Workpiece Coordinate Origin

Press the menu [Easy setting] to set the coordinate system offset so that the current machine position (for all axes) be-
comes the workpiece coordinate origin. It is only possible to set those axes where the cursor is located.
If the menu [Easy setting] is pressed when there is the cursor in coordinate system offset (G54 to G59), the local offset
(G52) data of the axis will be also erased.
IB-1501453-C
A message displays confirming whether it is okay to
erase the data.
All of the coordinate system indicated by the cursor is
cleared to zero.
In addition, all axes data of the local offset (G52) for the
coordinate system will be erased.
A message displays confirming whether it is okay to
erase the data.
All coordinate system data is erased.
In addition, all axes data of the local offset (G52) for the
G54 to G59 coordinate systems will be erased.
224