Mitsubishi Electric C80 Series Instruction Manual page 128

C80 Series Instruction Manual
4 Inputting and Outputting a Machining Program
Operation method (Selecting an NC memory program)
(1) Press the [M] short cut key. on the I/O screen of the
edit screen.
(2) Press the menu [File set].
By pressing the operation menu at this point, it is pos-
sible to change the device.
When the menu [Program] or [Program all] is select-
ed, the setting of "File name" column is cleared.
Only when the device functions as the memory, the
menu [Program] or [Program all] is valid.
<When selecting the file name from the list>
Move the cursor to the file name to be selected, and
(3)
set.
[↑], [↓] [INPUT]
<When inputting the file name from the input area>
Input the file name.
(3)
10013 [INPUT]
Designating multiple files
A wildcard (*) can be used for the file name.
By using a wildcard, multiple files can be transferred, compared, and erased at one time.
(Example 1) When programs 1 to 1000 exist in the NC memory.
Designate "*" in the file name: The target program is "1 to 1000".
Designate "*.*" in the file name: There is no target program.
Designate "1*" in the file name: The target program is "1, 10 to 19, 100 to 199, 1000".
Designate "1*.*" in the file name: There is no target program.
Designate "*1" in the file name: The target program is that where the position of the 1 is "1".
Designate "*1*" in the file name: The target program is all of the programs containing "1".
Designate "1*1" in the file name: The target program is "11, 111, 121, 131, 141, 151, 161, 171, 181, 191".
(Example 2) When programs 1.PRG to 1000.PRG, and 1 to 1000 exist in the USB memory.
Designate "*" in the file name: The target program is "1 to 1000".
Designate "*.*" in the file name: The target program is "1.PRG to 1000.PRG".
Designate "1*" in the file name: The target program is "1, 10 to 19, 100 to 199, 1000".
Designate "1*.*" in the file name: The target program is "1.PRG, 10.PRG to 19.PRG, 100.PRG to 199.PRG,
1000.PRG".
The device name changes to "Memory".
"Program" appears in the directory.
The NC memory program list and input area appear.
(1, 11, 21, 31, ...... 101, 111, ...... 981, 991)
(1, 10 to 19, 21, 31, ...... 100 to 199, 201, 210, ...... 981, 991,1000)
103 IB-1501453-C