Mitsubishi Electric C80 Series Instruction Manual page 81

C80 Series Instruction Manual
3 Inputting a Machining Program and Defining Variables
Operation method (editing machining program)
(1) Press the menu [Open] on the edit screen.
(2) Select the device.
(Example) Menu [Memory]
(3) (In case of the device other than NC memory.)
Press [↑], [↓],
to the directory with the machining program or the di-
rectory to be newly created.
If the list contents differ from the actual device or di-
rectory, press the menu [List Update].
(4) (For the devices other than NC memory)
Press the [INPUT] key.
(5)
Press [↑], [↓],
to the machining program to be edited.
The name of the machining program to be edited can
be input in the input area.
(6) Press the [INPUT] key.
If the program name has been entered in the input ar-
ea, the program contents is displayed.
(7) Edit the machining program.
(8) Press the [INPUT] key.
IB-1501453-C
, or key to move the cursor
, or key to move the cursor
The selected device name and directory (memory: /pro-
gram) appear in the device name and directory display
columns.
For the devices other than NC memory, root directory is
selected.
The device on the side being edited is displayed first. If
a file is not opened, NC memory will be opened.
Moves into the directory.
The program appears at the top if the file can be opened.
The cursor moves to the head character of the program.
The mode changes to the overwrite mode.
(When it is the initial insert mode, "INS" is displayed to
the right of the file name and the mode changes to the
insert mode.)
The list display is closed.
Refer to "3.6 Editing Operations".
The edited machining program is saved to the device.
56