Setting Data; Setting Numerals And Alphabetical Characters - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
2 Screen Operations

2.3 Setting Data

2.3.1 Setting Numerals and Alphabetical Characters

Operation method
The data is basically set with the following methods:
(1) Menu selection
(2) No. selection
(3) Cursor movement
(4) Data key input
(5) [INPUT] key input
Note
(1) The contents in the data setting area are only displayed until the [INPUT] key is pressed. These contents are invalidated
if the screen is changed. The data is written into the memory when the [INPUT] key is pressed.
(2) Special settings may be required depending on the data type. Refer to each item.
(3) The cursor may move to the right of the display item depending on the data type.
(4) If an illegal key is set, an error occurs when [INPUT] is pressed. Reset the correct data.
Operations in the data setting area
The key is input at the position where the cursor is displayed. If a cursor is not displayed, the key input is invalid.
When a key is input, the data appears at the cursor position, and the cursor moves one character space to the right.
[ →]/[←] keys: Moves the cursor one character to the left or right.
[INSERT] key: Enters the insert mode.
The mode returns to the overwrite mode when the [DELETE], [C.B CAN] keys are pressed, or when the screen is changed.
[DELETE] key: Deletes the character in front of the cursor.
[C.B] key: Deletes all characters in the data setting area.
Cursor operations on the screen
If a cursor is displayed on the screen, data is set in the data setting area and the [INPUT] key is pressed, the data appears
at the cursor position on the screen. The cursor moves to the next position.
The following keys can be used to move the cursor with the cursor keys.
: Moves the cursor to the previous line.
: Moves the cursor to the next line.
: Moves the cursor one item to the left.
: Moves the cursor one item to the right.
23 IB-1501453-C