Mitsubishi Electric C80 Series Instruction Manual page 315

C80 Series Instruction Manual
9 Machining a Workpiece
Display items
(15) Selective display
area
(*1) If the program number (program name) exceeds the number of digits that can be displayed, the last digit is indicated
by an asterisk (*).
The device name displays the device name detected by operation search.
If the sequence number exceeds six digits, only the low-order six digits are displayed.
(*2) If the data of the designated tool number has not been registered on the tool management screen, the tool icon is not
displayed.
(*3) When the variable-acceleration pre-interpolation acceleration/deceleration is enabled, the allowable acceleration
speed for each axis is always enabled, and "EAC" is not displayed while the control mode "VAC" is being displayed.
Sub-menus displayed by pressing the menu [Dsp sw.]
Sub-menus displayed by pressing the menu [Dsp sw.], when 2-part system simultaneous view is valid (#11019=0).
Menus
Switches the display format to the normal view.
Normal
view
Switches the display format to the simple view.
Simple
view
Switches counter type 1. (*1)
Counter
#1
Switches counter type 2. (*1) (*2)
Counter
#2
Switches counter type 3. (*1)
Counter
#3
Switches counter type 4. (*1) (*2)
Counter
#4
Switches counter type 5. (*3)
Counter
#5
(*1) This menu cannot be operated in simple view mode.
(*2) This menu cannot be operated in normal view mode (6 axes or more).
(*3) This menu cannot be operated in normal view mode.
Note
(1) The selected display format is also held when the power is turned on again.
IB-1501453-C
This area displays NC data that is selected in the parameter "#8940 Set select display".
Depending on the selected NC data, you can press the
or [|←] key to scroll pages.
Pressing the [INPUT] key displays the window that allows you to operate NC data displayed
in the selective display area.
The selective display area is displayed on the monitor screen. The monitor screen can be
switched when the parameter "#8973 Selective display" is set to "1".
Details
Details
290
, , [↑], [↓], [←], [→], [→|],