Switching The Display Format - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
9 Machining a Workpiece

9.2.2 Switching the Display Format

Monitr
Dsp sw.
The monitor screen display format can be switched using the menu [Dsp sw.]. The switchable display format varies depend-
ing on the value of the parameter "#11019 2-system display".
(1) In the 1-part system display (#11019 = 0), switch the display format between the normal view and simple view or among
single counter, dual counter, and quad counter.
(2) In the 2-part system simultaneous display (#11019 = 1), switch the display format among the counter1 (expand), dual
counter and quad counter.
Switching the normal view and simple view
When the parameter "#11019 2-system display" (2-part system simultaneous display) is disabled, you can press the sub
menu [Normal view] or [Simple view] in the [Dsp sw.] to switch the screen to the normal view or simple view.
Switching the Counter Display Format
When the parameter "#11019" (2-part system simultaneous display) is enabled, the counter display format can be switched
to the following three modes.
Counter1 (expand): Displays one counter (Counter type 1) for each part system.
Dual counter: Displays two counters (Counter types 1 and 2) for each part system.
Quad counter: Displays four counters (Counter types 1 to 4) for each part system.
Note
(1) For details on the screen image, refer to Screens 6 to 9 in "9.2.1 Screen Layout".
You can press the sub-menu [Counterexpand], [Dual counter], or [Quad counter] in the menu [Dsp sw.] to switch the
display format.
IB-1501453-C 292