Mitsubishi Electric C80 Series Instruction Manual page 313

C80 Series Instruction Manual
9 Machining a Workpiece
Display items
(4)
Tool No. display
(5)
Spindle rotation
speed display
(6)
Load meter display This area displays the spindle load value (%) with a bar graph and numeric values.
IB-1501453-C
This area displays the tool number, standby tool number and T command value of the cur-
rently selected tool.
<Monitor screen (Normal view)>
Tool No.
Standby tool No.
<Monitor screen (Simple view)>
Tool No.: Displays the tool number of the currently selected tool.
Standby tool No.: Displayed only when standby tool 1 is designated.
This is not displayed on the monitor screen (simple view).
Tool command value [T]: Displays the T command value that is commanded last.
In the L system, when "#11038 T disp typ" is set to "1", the diameter is displayed, includ-
ing the compensation number.
This area displays the actual number of spindle rotation speed as well as the spindle com-
mand value.
Spindle command value [S] display
On the prototype or mass production screen, the values above vary depending on the value
of the parameter "#1039 spinno".
The simple view shows the load meter of up to two spindles.
Numeric value display
The graph display color varies depending on the spindle load value. This item blinks when
a warning occurs. The caution and warning thresholds conform to the parameters #3192 to
#3194.
<Display example>
80％ 130％
(Normal) (Caution)
Details
Tool command value [T]
Tool No.
Tool command value [T]
Actual number of
spindle rotation
speed
Spindle load
percentage (%) display
Bar graph display
175％
(Warning)
288