The Batch Input/Output The Machining Program Of Nc Memory - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
4 Inputting and Outputting a Machining Program

4.9 The Batch Input/Output the Machining Program of NC Memory

Edit
I/O
On the I/O screen of the edit (Edit) screen, one file which consists of two or more machining programs can be transferred
to NC memory by dividing the file. The machining programs united with one file can be transferred to the external device.
The targets are the machining programs of the user.
The target external devices are memory card and USB memory.
Batch input and verify to NC memory
Example of "the external device -> NC memory" of machining program batch transfer
External device
(USB memory etc.)
PROCESS01
*
(Blank line)
O1000(TEST)
N1G28X0.Y0.Z0.
:
N999M02
OTAP.PRG(TAP01)
G84W-100.R0.P2000
:
M30
:
:
O9999
G92X0.Y0.Z0.
:
M30
%
When the transfer direction file name is designated, the top program name of transfer source can be omitted ("O1000" can
be omitted in above example).
Comment is not added after a program name when a program is output to an external device, however, if there is comment
after a program name when a program is input, the comment is input to the head of the first part system.
(1) Use the [←] or [|←] key to select file setting column
A on the I/O screen of the edit screen.
(2) Designate the transfer source device and directory.
(3) Designate the file which consists of two or more ma-
chining programs.
(4) Use the [→] or [→|] key to select file setting column
B.
(5) Designate the transfer direction device (memory).
IB-1501453-C
NC memory
1000
(TEST)
N1G28X0.Y0.Z0.
:
N999M02
%
TAP.PRG
Transfer
(TAP01)
G84W-100.R0.P2000
:
M30
%
:
:
9999
G92X0.Y0.Z0.
:
M30
%
116