Mitsubishi Electric C80 Series Instruction Manual page 54

C80 Series Instruction Manual
2 Screen Operations
Displaying the alarm guidance
(1)
Press the [?] key or the
alarm on monitor screen.
(Example) When "H/W stroke end axis exists" and
another alarm occur.
Note
(1) is displayed only on the software keyboard. For details, refer to "2.6.2 Software Keyboard".
(2) Pressing the or
(3) Pressing the [↑] or [↓] key scrolls the explanation contents in a line unit.
(4) When each parameter tab, such as the parameter, fixed cycle parameter, etc., is opened with the
of first parameter in each parameter tab is displayed.
(5) The alarm guidance is executed for the alarm that is occurred when the [?] key or the
fore, the guidance is not displayed for the alarm that has been handled or has occurred while the alarm guidance is
displayed.
(6) If the [?] key is pressed when an alarm is not occurring, the parameter guidance appears. In this state, if the "alarm" tab
is selected with the
(7) All the explanations of the alarm having the same error class and No. are displayed in the details column.
(8) When no alarm or only one alarm occurs, the arrow next to the page number is not displayed.
key during occurring
key scrolls the explanation contents by page.
key, nothing is displayed in the alarm guidance panel. (These columns are blank.)
The guidance window is opened while "alarm" tab is val-
id. The alarm details and remedy are displayed for "H/W
stroke end axis exists".
29
key, the contents
key has been pressed. There-
IB-1501453-C