C80 Series Instruction Manual
5 Setting a Tool and a Workpiece
5.5.6 Displaying Data by Designating Tool Management Data No.
There are two methods to switch the display from the designated tool management data number. You can switch the op-
eration by using the "#8975 No. search process" parameter.
Operation method
(Example 1) Select data number 12. ("#8975 No. search process" is "0")
(1)
Display the tool management screen.
(2)
Press the menu [Manage. No. search].
(3)
Enter the tool management data number to display,
and press the [INPUT] key.
12 [INPUT]
(Example 2) Select data number 12. ("#8975 No. search process" is "1")
(1)
Display the tool management screen.
(2)
Enter the tool management data number to be dis-
played.
12
(3)
Press the menu [Manage. No. search].
Note
(1) If a data number exceeding the limit is designated, the operation message "Setting error" is displayed.
IB-1501453-C
The tool management data list is displayed.
The tool management data list is displayed.
The specified data number is displayed at the top, and
the cursor is located onto the first data.
174