Mitsubishi Electric C80 Series Instruction Manual page 55

C80 Series Instruction Manual
2 Screen Operations
Changing the alarm guidance
(1) Press the [→] key or [→|] key when the alarm guid-
ance is displayed.
(2) Press the [←] key or [|←] key when the alarm guid-
ance is displayed.
Note
(1) Up to 18 alarm or warning messages can be displayed for alarm guidance from highest priority.
(2) Even if the [→], [←], [|←] or [→|] key is pressed when only one alarm occurs, the screen display is not switched.
Precautions
(1) The alarm guidance of stop code and operator message is not displayed.
(2) The PLC device information, which is displayed for the PLC alarm message guidance, displays the PLC device status
when the alarm guidance is displayed. Accordingly, even if the device value changes when the alarm guidance is being
displayed, the displayed PLC device information is not updated automatically. To update the information, close the
alarm guidance once and display it again by pressing the [?] key again. However, when the PLC device information is
redisplayed with [→], [←], [|←-] or [→|] key at occurrence of multiple alarms, the PLC device information is updated.
(3) Once the guidance data is read, the guidance can be displayed even when the memory card is removed.
IB-1501453-C
The alarm guidance with one priority lower than the cur-
rent alarm guidance is displayed.
If the [→] key or [→|] key is pressed when the lowest pri-
ority alarm is displayed, the alarm with the highest prior-
ity is displayed.
(Example) When 3 alarms occur.
(1/3) (2/3)
The alarm guidance with one priority higher than the cur-
rent alarm guidance is displayed.
If the [←] key or [|←] key is pressed when the highest pri-
ority alarm is displayed, the alarm with the lowest priority
is displayed.
(Example) When 3 alarms occur.
(1/3) (2/3)
30
(3/3)
(3/3)