Defining Variables; Common Variables - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
3 Inputting a Machining Program and Defining Variables

3.9 Defining Variables

Refer to "Programming Manual" for more details on variables.

3.9.1 Common Variables

Monitr
Com var
Select [Com var] on the monitor (Monitr) screen to set or display the details of the common variables.
If there is a common variable command (*1) in the machining program, the variable value (variable name) set when the
block is executed is displayed.
The number of common variable sets differs according to the specifications.
(*1) The variable names can be set for common variables #100 to #199 and #500 to #599.
(1)
(2)
(3)
(4)
IB-1501453-C 88