Mitsubishi Electric C80 Series Instruction Manual page 104

C80 Series Instruction Manual
3 Inputting a Machining Program and Defining Variables
Operation method (Absolute/incremental command depending on G command)
(1) Set "#1126 PB_G90" to "0" on the parameter screen.
Press the main menu [Edit] on the edit screen, and
(2)
press [Displaychange].
(3) Open the program pressing [Edit] and [Open] on the
edit screen.
(4) Move the axis during manual mode.
(5) Input the data such as the G codes in the area for
playback editing.
(6) Press the axis address key such as [X] or [Y].
Incremental value mode is set.
The "playback display type" is displayed.
The menu [<--> change] cannot be used.
When the incremental value is set, the initial value is "0".
The selected program is displayed in right area.
<Note>
When the program is displayed on the right side, the
playback edit is displayed on the right side.
When the incremental value is set, playback move-
ment amount will be cleared to "0" for all axes.
The axis movement amount is displayed in playback
movement amount.
When the absolute value is set, "the program position +
manual interrupt amount" is displayed as the playback
movement amount.
In the incremental value mode, the axis movement
amount by manual mode is added to currently playback
movement amount.
The alphanumeric characters, [←], [→] and [DELETE]
keys can be input in the area for playback editing.
<Note>
If the [C.B] key is pressed, all the data in the play-
back editing area is deleted.
When the [↑] or [↓] key is pressed, the program cur-
sor in the program editing area will move.
When the page up key or page down key is pressed,
the program in the program editing area will scroll.
When the menu key is pressed, the process corre-
sponding to the program editing area will run.
When the cursor appears on input area of the pro-
gram editing area by pressing [Line jump], [Line co-
py], [Line clear], [String search], [String replace],
[MDI registration] or [N auto add], the key input is
made to the input area of the program editing area.
When window is displayed by pressing [Open],
[Open(New)] or [Erase file], the key input is made to
the currently displayed window.
The program cursor in the program editing area can-
not move left and right, but can move only up and
down.
The playback movement amount is input after the axis
address in the playback editing area. If the axis address
key is pressed while the playback movement amount is
being changed, the playback movement amount at the
time the key was pressed will be input.
<Note>
When inputting a comment, etc., the characters that
are the same as the axis address will all be handled
as the axis address.
79 IB-1501453-C