Executing The Mstb Commands - Mitsubishi Electric C80 Series Instruction Manual
Hide thumbs
Also See for C80 Series:
- Manual (749 pages) ,
- Maintenance manual (162 pages) ,
- Connection and set up manual (304 pages)
Table of Contents
Advertisement
C80 Series Instruction Manual
9 Machining a Workpiece
9.3.9 Executing the MSTB Commands
If the menu [MTB history] is pressed after restart search is completed, the MSTB commands used for machining program
appear. If the cursor is moved to the listed M, S, T or B command and the [INPUT] key is pressed, that command will be
executed.
Up to 35 M commands, 3 commands each for S1 to S8, 3 T commands and 3 B commands are displayed.
If many MSTB commands are used for machining, the MSTB commands used at first will not appear.
Operation method
(1)
Press the sub-menu [MSTB history].
(2)
Using the [↑], [↓], [→] or [←] key, move the cursor to
the position of the data to set.
(3)
Press the [INPUT] key.
(4)
Repeat steps (2) and (3).
(5)
When completed with all settings, press the menu
[Close] or [MSTB history].
IB-1501453-C
The pop-up window changes to the MSTB history win-
dow. The MSTB commands used for machining program
are listed.
The designated command is executed. A value, which
has been commanded once, is grayed out. The cursor
will move to the next item.
The MSTB history pop-up window closes and the restart
search main window appears as a pop-up window.
330
Advertisement
Table of Contents
