Mitsubishi Electric C80 Series Instruction Manual page 37

C80 Series Instruction Manual
2 Screen Operations
The following keys are provided on the keyboard.
These keys are displayed on the GOT with SVGA resolutions.
Key type
Data setting key A B C D E F
G H I J K L
M N O P Q R
S T U V W X
Y Z
0 1 2 3 4 5
6 7 8 9 + -
= / . ; EOB etc.
Menu list key
Help key
System switching key
Page up/down keys
Cursor keys
Data correction keys
Data delete key
Data insert key
Shift key
INPUT key
IB-1501453-C
Key
Menu list key
Help key
System switching key
Page up key
Page down key
(DELETE)
(INSERT)
(C.B CAN)
(SHIFT)
(INPUT)
12
Operation
These keys are pressed to set alphabetic characters, nu-
merals and operation symbols, etc.
This is function that displays each screen's menu configu-
ration as a list.
This displays the operation guidance, parameter guidance
and alarm guidance corresponding to the current opera-
tion.
When using a multi-part system NC, this displays the data
of the next part system. The screen does not change if it is
common to part systems or when only one part system is
used.
When the displayed contents cover several pages, this
displays the contents of the previous page.
When the displayed contents cover several pages, this
displays the contents of the next page.
This moves the cursor up or down one when setting data
in the screen display items.
This moves the data input cursor one character to the left
or right in the data setting area.
This moves the cursor one item to the left or right when se-
lecting data in the screen display items.
at cursor left end: Moves to the right end of previous
line.
at cursor right end: Moves to left end of next line.
This deletes the character just before the cursor position in
the data setting area.
When editing a program, the character on which the cursor
is will be deleted and and data after the cursor will move to
the left.
This inputs the data insertion mode. When a data setting
key is pressed, a character is inserted in front of the cur-
rent cursor position.
The overwrite mode is entered when the [DELETE], [C.B
CAN], [INPUT], cursor or TAB, etc., keys are pressed, or
when the screen is changed.
This cancels the setting in the data setting area.
This validates the setting on the lower line of the data set-
ting key.
This fixes the data in the data setting area, and writes it to
the internal data.