Mitsubishi Electric C80 Series Instruction Manual page 115

C80 Series Instruction Manual
3 Inputting a Machining Program and Defining Variables
Menus
Menus
This executes an absolute input.
=Input
If "#8930 Disable=INPUT:var" is set to "1", this menu cannot be selected.
This executes an incremental input.
+Input
This designates the variable No. to be displayed at the head.
Var No
Common variable 1 (common to part systems) #400 to #999, common variable 1 (common to part sys-
search
tems) #100100 to #800199, and common variable 2 (for each part system) #100 to #199 are displayed
in each area. When another area is displayed, press this menu and specify the common variable No.
This returns the last rewritten data to its previous value.
Undo
This menu key is valid for "Data Input", "Paste" and "Undo" operations. Note that return to the original
value is not possible after variable clear and comment clear operations.
<Note>
When the parameter "#8939 Undo confirm msg" is set to "1", the menu is highlighted while the op-
eration message is displayed.
This copies the variable value and variable name at the cursor position.
Copy
This pastes the copied variable value and variable name.
Paste
This clears the contents of the variable No. at the cursor position or continuous variable Nos.
Variabl
clear <Note>
The contents are not cleared to "0". The state with no data is entered.
This clears the variable No. at the cursor position or the continuous variable number's variable name
Name
(Variable name: variable No. 100 to 199 or 500 to 599).
clear
This closes the pop-up window and quits this function.
Close
Operation method (Setting "135.000" in variable No. 102)
(1) Press the menu [Var No search].
(2) Designate the variable No.
102 [INPUT]
The cursor can be moved to 102 using the [↑], [↓],
(3) Input a numeric value.
135 [INPUT]
The value can also be designated by pressing the menu [=INPUT] instead of the [INPUT] key.
The value can also be input as an exponential.
(1.35E2 [INPUT] or 1.35E2 [=INPUT].)
Operation method (Adding "1.234" to variable No. 102)
(1) Select common variable 102 with the same proce-
dure as steps (1) and (2) above.
(2) Input a numeric value.
1.234 [+INPUT]
IB-1501453-C
Details
, or key.
The input value added to the original value is displayed.
(Example) If the original value is 135.000, 136.234 ap-
pears. (135.000 + 1.234 = 136.234)
90