Moving To Designated Compensation Number - Mitsubishi Electric C80 Series Instruction Manual
Hide thumbs
Also See for C80 Series:
- Manual (749 pages) ,
- Maintenance manual (162 pages) ,
- Connection and set up manual (304 pages)
Table of Contents
Advertisement
C80 Series Instruction Manual
5 Setting a Tool and a Workpiece
5.4.8 Moving to designated Compensation Number
There are two methods to switch from the designated compensation number display. You can switch the operation by using
the "#8975 Change No. search" parameter.
(Example 1) Select compensation number 16. (If "#8975 Change No. search" is "0")
(1)
Displays the tool compensation amount screen.
(2)
Press the menu [Ofs No search].
(3)
Enter the compensation number you wish to display,
and press [INPUT].
16 [INPUT]
(Example 2) Select compensation number 16. (If "#8975 Change No. search" is "1")
(1)
Displays the tool compensation amount screen.
(2)
Enter the compensation number you wish to display.
16
(3)
Press the menu [Ofs No search].
Note
(1) If an compensation number exceeding the limit is designated, the operation message "Setting error" is displayed.
The compensation number that you have set is dis-
played at the top, and the cursor is located on the first
data. The highlighting of the menu [Comp. No. search] is
canceled.
The compensation number that you have set is dis-
played at the top, and the cursor is located on the first
data.
157
IB-1501453-C
Advertisement
Table of Contents
