Overwriting Data (Initial Data Insertion Mode); Deleting Data - Mitsubishi Electric C80 Series Instruction Manual
Hide thumbs
Also See for C80 Series:
- Manual (749 pages) ,
- Maintenance manual (162 pages) ,
- Connection and set up manual (304 pages)
Table of Contents
Advertisement
C80 Series Instruction Manual
3 Inputting a Machining Program and Defining Variables
3.6.5 Overwriting Data (Initial Data Insertion Mode)
Operation method
(1)
Move the cursor to the position where data is to be in-
serted.
(2)
Press the [INSERT] key.
(3)
Set the data.
(4)
When the setting is completed, press the [INPUT]
key.
Note
(1) The insertion mode will be finished if a key such as [DELETE], [C.B], [CAN], [INPUT], [↑], [↓], [←], [→], [|←], [→|],
or
pressed.
(2) For normal editing, EOB(;) is added to a row without EOB(;), and the cursor moves to the next line. A row with EOB(;)
is skipped, and the cursor moves to the next line. (No cursor movement.)
3.6.6 Deleting Data
Operation method (Deleting one character) (Deleting by DELETE key action ("#8967 DELETE key action" is set to "0"))
(1)
Move the cursor to the character to be deleted.
(2)
Press the [DELETE] key.
(3)
Press the [INPUT] key.
Operation method (Deleting one character) (Deleting by BackSpace key action ("#8967 DELETE key action" is set to
"1"))
(1)
Move the cursor to the right side of the character to
be deleted.
(2)
Press the [DELETE] key.
(3)
Press the [INPUT] key.
IB-1501453-C
The mode changes to the overwrite mode.
"INS" appears to the right of the file name.
The cursor changes to '■'.
The data is set from the position of the cursor. Data at
the area is overwritten.
The cursor moves one space (character) at a time to the
right as the data is set.
The set data is fixed.
The mode returns to the insertion mode, "INS" is dis-
played in the right side of the file name, and the message
"Editing" disappears.
The cursor returns to '|'.
1 character is deleted at the cursor position, and "Edit-
ing" appears. The data from the cursor position moves to
the left.
When this key is held down, the characters can be delet-
ed one at a time.
The edited machining program is saved to the device
and "Editing" disappears.
1 character at the left side of the cursor position is delet-
ed, and "Editing" appears. The data from the cursor po-
sition moves to the left.
When this key is held down, the characters can be delet-
ed one at a time.
The edited machining program is saved to the device
and "Editing" disappears.
66
Advertisement
Table of Contents
