Graphic Operation Terminal (Got); Screen Operation Of Got - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
2 Screen Operations
2Screen Operations

2.1 Graphic Operation Terminal (GOT)

2.1.1 Screen Operation of GOT

At the start, use one of the following methods to display CNC monitor2 screen on a GOT.
Press (CNC monitor2) button on the Utility screen.
Press the "special function switch" (CNC monitor2) assigned to the user-customized screen. (*1)
Utility screen
User-customized screen (*1)
(*1) For details on the setting, refer to the instruction manual issued by the MTB.
How to display the utility screen
(1) Press the screen at the top left.
(2) Press [Monitor] tab.
IB-1501453-C
CNC monitor2
CNC monitor2 screen
8