C80 Series Instruction Manual
11 Performing a Backup Operation
11.5 Changing a File Name (Rename)
Mainte
I/O
Operation method
(1)
Press the menu [Area change] to select file setting column A.
(2)
Designate the original device, directory and file name.
(3)
Press the menu [Area change] to select file setting column B.
(4)
Designate the new device, directory and file name.
(5)
Press the menu [Rename A→B].
(6)
Press the [Y] or [INPUT] key.
Note
(1) Make sure the original and new devices are the same.
(2) If the file to be renamed is running or in "program restarting" mode, the operation message "Executing automatic oper-
ation" or "Program restarting" is displayed, and the name will not be changed.
(3) If a file that does not exist is designated for the original file, or if an existing file name is designated for the new file se-
lection, an error occurs, and the name is not changed.
407
IB-1501453-C