Registering New Tool Management Data; Switching The Item Type Of The Tool Management Data Detailed Portion - Mitsubishi Electric C80 Series Instruction Manual
Hide thumbs
Also See for C80 Series:
- Manual (749 pages) ,
- Maintenance manual (162 pages) ,
- Connection and set up manual (304 pages)
Table of Contents
Advertisement
C80 Series Instruction Manual
5 Setting a Tool and a Workpiece
5.5.4 Registering New Tool Management Data
Operation method
(1)
Display the tool management screen.
If the details of tool management data is already dis-
played, press the menu [List view] and switch to the
display of tool management data list.
(2)
Use the [↑] or [↓] key to select the data number, which
the tool No. is not specified yet.
(3)
Press the [INPUT] key.
(4)
Input the tool number.
100 [INPUT]
5.5.5 Switching the Item Type of the Tool Management Data Detailed Portion
Operation method
(1)
Display the tool management screen.
(2)
Use the [↑] or [↓] key to select the data number to be
displayed its details.
(3)
Press the [INPUT] key.
(4)
Press the menu [Type switch].
(*1) If the machine parameter "#1445 Tol-Custom-nondisp" (Hide added info on tool management screen) is set to "1", the
"Added info" type is skipped and it is switched to the next type.
The tool management data list is displayed.
The tool management data of tool number 100 is regis-
tered in the selected data number, and the cursor is
shifted to the next lower position.
The tool management data list is displayed.
Each time you press the menu, the item type shown in
the detailed view is switched in the following sequence.
"Full view" -> "Basic info" -> "Shape info" -> "Cut cond."
-> "Offset" -> "T-life" -> "Added info" (*1) -> "Full view".
The cursor is moved to the top of the tool management
data detail view.
173
IB-1501453-C
Advertisement
Table of Contents
