Other Functions; Merging A File - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
11 Performing a Backup Operation

11.8 Other Functions

11.8.1 Merging a File

Mainte
I/O
Operation method
(1) Press the menu [Area change] to select file setting
column A.
(2) Designate the merge destination device, directory,
and file name.
(3) Press the menu [Area change] to select file setting
column B.
(4) Designate the merge source device, directory, and
file name.
(5) Press the menu [Merg B→A].
(6) Press the [Y] or [INPUT] key.
Note
(1) If the merge destination file (file in file setting column A) is running or in "program restarting" mode, the operation mes-
sage "Executing automatic operation" or "Program restarting" is displayed, and the files will not be merged.
(2) When the parameter "#19006 EOR Disable" is set to "1", a file is merged as it is. But the terminal character of the merge
destination file (file in file setting column A) is "%", a line feed code is added and then merged.
(3) Do not perform the file operation on the merge source and destination files during the merge. The file may be damaged
with the file operation.
IB-1501453-C
A message appears when the merge is completed.
The details of the file in file setting column A will be as
follows when the merge is completed.
(FILE A)
G28 XYZ
G90 F800
G00 X100. Y100.;
(FILE B)
G91 G28 XYZ
F1000;
G01 X200. Y200.;
M02;
%
The details of the file in file setting column B do not
change.
410
Details of file in file setting
column A before merge.
Details of file in file setting
column B before merge.