Setting And Erasing The Tool No. Of Spindle/Standby Tools; Erasing The Tool Registration Data - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
5 Setting a Tool and a Workpiece

5.2.3 Setting and Erasing the Tool No. of Spindle/Standby Tools

Operation method (Setting the tool No. of spindle/standby tools)
(1) Press the menu [Spindle standby].
(2) Move the cursor to the data to be set using the [↑], [↓]
keys.
(3) Input a new tool No.
50 [INPUT]
(4)
Press the menu [Spindle standby] or
the setting.
Note
(1) When the menu [Spindle standby] or
mode will be canceled and the set data will be ignored.
(2) Move the cursor with
Operation method (Erasing the tool No. of spindle/standby tools)
(1) Press the menu [Spindle standby].
(2) Move the cursor to the tool No. to be erased and in-
put "0".
0 [INPUT]
Note
(1) Move the cursor with

5.2.4 Erasing the Tool Registration Data

Operation method (Selecting a magazine number and erasing the tool registration data.)
(1) Press the menu [Magazn 2].
(2) Press the menu [Magazn clear].
(3) Press the [Y] or [INPUT] key.
to complete
key is pressed before pressing the [INPUT] key, the spindle/standby setting
key to set the "D" data.
key and set "0" to erase the "D" data as the same manner as the tool No.
125
The spindle/standby setting mode is canceled.
All selected magazine tool data (tool number and D) is
erased.
Spindle/standby tool data is not erased.
IB-1501453-C