Checking The Movement Under Machining (Monitor Screen); Screen Layout - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
9 Machining a Workpiece

9.2 Checking the Movement under Machining (Monitor Screen)

Monitr
Various information related to operation, such as the axis counter, speed display and MSTB command are displayed on
the Monitor screen. In addition, you can perform various monitoring operations, as shown below.
(1) Search
(2) Research
(3) Editing the searched machining program
(4) Correction of operating program's buffer
(5) Counter set
(6) Manual numerical value command, etc.

9.2.1 Screen Layout

The screen layout varies depending on whether the 2-part system simultaneous display (#11019 2-system display) is valid
or invalid, operation mode, and the number of NC axes. Refer to the table below for details.
Screen
1-part system display
2-part system simultane-
ous display
Number of counter
Normal view Up to 5 axes
6 axes or more
Simple view Up to 5 axes
6 axes or more
Counter1 (expand) Up to 4 axes
Dual counter Up to 4 axes
5 axes or more
Quad counter Up to 4 axes
Select display
display axes
Hidden
Display
Hidden
Display
Display not possible
Display not possible
Display not possible
Display not possible
Display not possible
Display not possible
281
Reference
Screen 1
Screen 2
Screen 3
-
Screen 4
Screen 5
Screen 6
Screen 7
Screen 8
Screen 9
IB-1501453-C