Mitsubishi Electric C80 Series Instruction Manual page 184

C80 Series Instruction Manual
5 Setting a Tool and a Workpiece
Display items
Display items
(1) Tool management data
list portion
(2) Data No.
(3) Display data type
(4) Tool shape drawing
(5) Tool management data
detailed portion
(6) Input section
The preset tool management data is listed.
The tool management data list consists of the right side and left side parts.
When you select the [Tool Manage Data - Detail View] and switch to the [Detail View],
the right part of the tool management data list is switched to the detail view of tool man-
agement data.
Indicates the number of the tool management data.
It indicates the item type that is displayed in the detail view of tool management data.
The display data type can be "Full view", "Basic info", "Shape info", "Cut cond.", "Off-
set", "T-life", or "Added info".
"Full view" is displayed after the power is turned ON, the view is switched by pressing
the menu [Type switch].
It displays the tool shape of the tool management data at cursor position according to
the tool type.
The display and hiding are switched according to the display data type.
Displays or sets the tool data that has been selected from the tool management data
list.
The display items are changed depending on the tool type and the display data type.
This displays the input data.
159
Details
IB-1501453-C