Mitsubishi Electric C80 Series Instruction Manual page 192

C80 Series Instruction Manual
5 Setting a Tool and a Workpiece
Setting item
Length : A
Diameter : B
Length : B
Nose angle : C
Corner R : C
Nose angle : C
Pitch : C
Cutter L : C
Nose R : C
Tip dia. : D
Root dia. : D
Shank dia. : D
Nose angle : D
Nose width : D
Edge angle : E
Max groove D: E
Tool width: F
Holder H: G
Holder D : H
3D CHK Tool CR
Spindle rpm S
Feedrate F
Material
Coolant M code
Details
Tool type: all tools
Sets the tool length.
Tool type: Mill tools, lathing drill and lathing tap
Sets the tool diameter. (*2)
Tool type: Lathe turning, groove, thread cut
Sets the tool length.
Tool type: Drill
Sets the nose angle.
Tool type: Radius end mill
Sets the corner R arc radius.
Tool type: Chamfer
Sets the nose angle.
Tool type: Tap
Sets the pitch.
Tool type: Face mill
Sets the cutter length.
Tool type: Lathe turning, groove
Sets the nose R.
Tool type: Chamfer
Sets the tool tip diameter. (*2)
Tool type: Tap
Sets the root diameter.
Tool type: Face mill
Sets the shank diameter. (*2)
Tool type: Lathe turning
Sets the nose angle.
Tool type: Groove
Sets the nose width
Tool type: Lathe turning
Sets the edge angle.
Tool type: Groove
Sets the groove depth.
Tool type: Lathe turning, groove, thread cut
Sets the tool width.
Tool type: all tools
Sets the holder hight.
Tool type: all tools
Sets the holder diameter.
Sets the color to be used in 3D check screen.
Tool type: all tools
Red will be set when no value is input.
Sets the spindle rotation speed.
Sets the tool feedrate.
Sets the material of the tool.
A maximum of 4 alphanumeric characters and symbols
can be set for the name. (*1)
Sets the coolant M code.
<Length>
Setting range varies depending on
the parameter "#1041 Initial inch".
mm: 0.000 to 9999.999
inch: 0.0000 to 999.9999
<Angle>
0.000 to 180.000 degrees
1: Gray
2: Red
3: Yellow
4: Blue
5: Green
6: Light blue
7: Purple
8: Pink
0 to 99999999
Setting range varies depending on
the parameter "#1041 Initial inch".
mm: 0 to 1000000
inch: 0 to 100000
A maximum of 4 characters
0 to 99999999
167
Setting range
IB-1501453-C