Mitsubishi Electric C80 Series Instruction Manual page 398

C80 Series Instruction Manual
10 Troubleshooting
Display items
(2) Sampling specifica-
tions
System
Spindle
Servo
(3) Collecting data select This selects the diagnosis data to be collected.
Key history
Alarm history
PLC I/O history
AC alarm history
Touch history
Pert program history
Menus
Menus
This begins collecting sampling data and history data.
Start
This stops the sampling data and history data collection operation.
Stop
This stops the sampling data and history data collection operation, and clears the collected data.
Data
This is not displayed when "#1263 bit1" is ON.
clear
Note
(1) The alarm history data collection start/stop operation is switched using the menu [Start] or [Stop] of data collection re-
gardless of whether "Alarm history" is set to "0" or "1".
Specify the part system, spindle, and servo axes where sampling data is to be
collected.
Specify the part systems where sampling data is not to be collected.
Specify the part system in HEX.
When "0" is set, sampling is carried out for all part systems.
This setting is ignored if a non-existent part system is specified.
Specify the spindle where sampling data is not to be collected.
Specify the part system in HEX.
When "0" is set, sampling is carried out for all spindles.
This setting is ignored if a non-existent spindle is specified.
Specify the servo axes where sampling data is not to be collected.
Specify the part system in HEX.
This setting is not system-specific.
When "0" is set, sampling is carried out for all axes.
This setting is ignored if a non-existent servo axis is specified.
0: Collected.
1: Not collected.
This selects whether or not key history data is collected.
This selects whether or not alarm history data is collected.
This selects whether or not PLC input/output signal history data is collected.
This selects whether or not AC power ON/OFF history data is collected.
This selects whether or not touchscreen history data is collected.
This selects whether or not the data of the machining program No. and the PLC
No. is collected.
373
Details
Details
IB-1501453-C