Mitsubishi Electric C80 Series Instruction Manual page 219

C80 Series Instruction Manual
5 Setting a Tool and a Workpiece
Operation method (Designating and erasing the multiple lines)
(1) Press the menu [Line clear].
(2) Set the range to be erased by marking the first and last # Nos. with a "/".
122/125 [INPUT]
(3) Press the [Y] or [INPUT] key.
Press a key other than [Y] or [INPUT] in order not to erase the data.
Operation method (Registering a group)
(1) Press the menu [Group regist].
(2) Set the No. of the group to be registered.
25 [INPUT]
Note
(1) An error occurs if the group No. duplicates a pre-existing group No.
(2) The group is not registered if one of the operations below is performed after registering a new group No.
If the application is exited without registering even 1 item of tool life data.
The screen is changed to that of other than the group unit display.
The part system is changed.
Operation method (Erasing a group)
(1) Move the cursor to the group No. to be erased.
(2) Press the menu [Group delete] and [INPUT] key.
(3) Press the [Y] or [INPUT] key.
IB-1501453-C 194