Mitsubishi Electric C80 Series Instruction Manual page 70

C80 Series Instruction Manual
2 Screen Operations
Switching axis or part system
On the screen where you can switch the axes being displayed with the menu [Next axis] such as the axis parameter screen,
flick (quickly run your fingertip across the screen) horizontally to switch an axis or a part system to be displayed.
(Example) Displaying the next axis of the axes' parameters.
The axis parameters (X, Y and Z axes) are
displayed.
Selecting or determining a file
If you double-tap a target file on a screen that displays a file list, for example, on the Operate search screen, operation is
performed in the same way as when the [INPUT] key is pressed.
(Example) Double-tap on [Monitr] - [Search]
Double-tap a file.
The Search screen is being displayed.
Note
(1) The subsequent operation varies depending on the target you double-tapped.
When the target is a file: The selected file name is specified.
When the target is a folder: The list of files in the selected folder is displayed.
Flick
Operation search will be
45
The next axes (A, U and V axes) are displayed.
carried out.
Search is executed.
IB-1501453-C