Setting The Plc Command; Setting/Erasing The Tool No. Of Spindle/Standby Tools - Mitsubishi Electric 700 Series Training Manual

3. Setup Screen

3.4.2 Setting the PLC Command

Operation method (Setting the PLC command)
(1) Set the value after the
menu.
PLC command
(Note) Select the PLC Command menu again before pressing the INPUT key, then the menu
highlight returns to normal, and the PLC command setting mode becomes disable.
(2) Press the menu
key again to finish setting.

3.4.3 Setting/Erasing the Tool No. of Spindle/Standby Tools

Operation method (Setting the tool No. of spindle/standby tools)
(1) Press the
Spindle standby
(2) Move the cursor to the data to be set using
the ↑ and ↓ keys.
(3) Input a new tool No.
50 INPUT
(4) Press the
Spindle standby
or key to quit the spindle/standby
setting mode.
(Note 1) When the Spindle standby menu again or
key, the spindle/standby setting mode will be cancelled and the set data will be ignored.
(Note 2) Move the cursor with
Operation method (Erasing the tool No. of spindle/standby tools)
(1) Press the
Spindle standby
(2) Move the cursor to the tool No. to be
erased and input "0".
0 INPUT
(Note 1) Move the cursor with
No.
PLC command
12 INPUT
PLC command , or the
menu.
(Note1)
menu again
key to set the "D" data.
→
menu.
key and set "0" to erase the "D" data as the same manner as the tool
→
The set value displays in the PLC command setting field, and
the PLC command setting mode is enabled.
The function of the command depends on the machine tool
builder's specifications.
The PLC command setting mode is released, and the menu
highlight returns to normal.
The cursor appears at the top tool No. of spindle/standby.
In addition, the first "D" column is highlighted.
The tool No. changes. The cursor moves to the next tool No.
The spindle/standby setting mode is cancelled.
key is pressed before pressing the INPUT
The cursor appears at the top tool No. of spindle/standby.
In addition, the first "D" column is highlighted.
The tool No. of spindle/standby changes to "0".
101
3.4 Tool Registration