Viewing Mobility Group Statistics; Using The Gui To View Mobility Group Statistics - Cisco 2100 Series Configuration Manual

Viewing Mobility Group Statistics

To verify the mobility configuration, enter this command:
Step 6
show mobility summary
To save your settings, enter this command:
Step 7
save config
Repeat this procedure on every controller to be included in the mobility group. All controllers in the
Step 8
mobility group must be configured with the MAC address and IP address of all other mobility group
members.
To enable or disable debugging of multicast usage for mobility messages, enter this command:
Step 9
debug mobility multicast {enable | disable}
Viewing Mobility Group Statistics
You can view three types of mobility group statistics from the controller GUI:
•
•
•
You can view mobility group statistics using the controller GUI or CLI.

Using the GUI to View Mobility Group Statistics

Using the controller GUI, follow these steps to view mobility group statistics.
Click Monitor > Statistics > Mobility Statistics to open the Mobility Statistics page (see
Step 1
Cisco Wireless LAN Controller Configuration Guide
12-16
Global statistics—Affect all mobility transactions
Mobility initiator statistics—Generated by the controller initiating a mobility event
Mobility responder statistics—Generated by the controller responding to a mobility event
Chapter 12 Configuring Mobility GroupsWireless Device Access
Figure 12-13).
OL-17037-01