Disabling Accounting Servers Per Wlan - Cisco 2100 Series Configuration Manual

Chapter 6 Configuring WLANsWireless Device Access
To see the status of the web redirect features for a particular WLAN, enter this command:
Step 4
show wlan wlan_id
Information similar to the following appears:
WLAN Identifier.................................. 1
Profile Name..................................... test
Network Name (SSID).............................. test
...
Web Based Authentication......................... Disabled
Web-Passthrough.................................. Disabled
Conditional Web Redirect......................... Disabled
Splash-Page Web Redirect......................... Enabled
...

Disabling Accounting Servers per WLAN

This section provides instructions for disabling all accounting servers on a WLAN. Disabling accounting
servers disables all accounting operations and prevents the controller from falling back to the default
RADIUS server for the WLAN.
Follow these steps to disable all accounting servers for a RADIUS authentication server.
Click WLANs to open the WLANs page.
Step 1
Click the ID number of the WLAN to be modified. The WLANs > Edit page appears.
Step 2
Step 3 Click the Security and AAA Servers tabs to open the WLANs > Edit (Security > AAA Servers) page
(see
Figure 6-25 WLANs > Edit (Security > AAA Servers) Page
OL-17037-01
Figure 6-25).
Cisco Wireless LAN Controller Configuration Guide
Configuring WLANs
6-53