Cisco 2100 Series Configuration Manual page 183

Wireless lan controller
Hide thumbs Also See for 2100 Series:
Table of Contents

Advertisement

Chapter 4
Configuring Controller SettingsWireless Device Access
RFID Tag
To see the location-based RFID statistics, enter this command:
2.
show location statistics rfid
Information similar to the following appears:
RFID Statistics
Database Full :
Null Bufhandle:
Bad LWAPP Data:
Off Channel:
Bad AP Info :
Above Max RSSI:
Invalid RSSI:
Oldest Expired RSSI:
To clear the location-based RFID statistics, enter this command:
3.
clear location statistics rfid
To clear a specific RFID tag or all of the RFID tags in the entire database, enter this command:
4.
clear location rfid {mac_address | all}
To see whether location presence (S69) is supported on a client, enter this command:
5.
show client detail client_mac
When location presence is supported by a client and enabled on a location appliance, the location
appliance can provide the client with its location upon request. Location presence is enabled
automatically on CCXv5 clients.
Information similar to the following appears:
Client MAC Address............................... 00:40:96:b2:a3:44
Client Username ................................. N/A
AP MAC Address................................... 00:18:74:c7:c0:90
Client State..................................... Associated
Wireless LAN Id.................................. 1
BSSID............................................ 00:18:74:c7:c0:9f
Channel.......................................... 56
IP Address....................................... 192.168.10.28
Association Id................................... 1
Authentication Algorithm......................... Open System
Reason Code...................................... 0
Status Code...................................... 0
Session Timeout.................................. 0
Client CCX version............................... 5
Client E2E version............................... No E2E support
Diagnostics Capability........................... Supported
S69 Capability................................... Supported
Mirroring........................................ Disabled
QoS Level........................................ Silver
...
Note
OL-17037-01
RSSI expiry timeout:
Half life:
Notify Threshold:
0
0
0
0
0
0
0
0
See the Cisco Wireless Control System Configuration Guide or the Cisco Location Appliance
Configuration Guide for instructions on enabling location presence on a location appliance.
Configuring and Viewing Location Settings
5 sec
0 sec
0 db
Failed Delete:
Bad Packet:
Bad LWAPP Encap:
Bad CCX Version:
Below Max RSSI:
Add RSSI Failed:
Smallest Overwrite:
0
Cisco Wireless LAN Controller Configuration Guide
0
0
0
0
0
0
4-87

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

4400 series

Table of Contents