Cisco 2100 Series Configuration Manual page 497

Chapter 8 Controlling Mesh Access Points
Figure 8-21
This page lists the parent, children, and neighbors of the access point. It provides each access point's
name and radio MAC address.
To perform a link test between the access point and its parent or children, follow these steps:
Step 3
Hover your cursor over the blue drop-down arrow of the parent or child and choose LinkTest. A
a.
pop-up window appears (see
Figure 8-22 Link Test Window
b. Click Submit to start the link test. The link test results appear on the Mesh > LinkTest Results page
(see
OL-17037-01
All APs > Access Point Name > Neighbor Info Page
Figure
Figure 8-23).
8-22).
Cisco Wireless LAN Controller Configuration Guide
Viewing Mesh Statistics and Reports
8-45