Cisco 2100 Series Configuration Manual page 302

Configuring IDS
Check the State check box to enable this signature to detect security attacks or uncheck it to disable this
Step 9
signature. The default value is enabled (or checked).
Step 10 Click Apply to commit your changes. The Standard Signatures or Custom Signatures page reflects the
signature's updated state.
Step 11 Click Save Configuration to save your changes.
Using the GUI to View IDS Signature Events
Follow these steps to view signature events using the controller GUI.
Step 1 Click Security > Wireless Protection Policies > Signature Events Summary. The Signature Events
Summary page appears (see
Figure 5-60
This page shows the number of attacks detected by the enabled signatures.
To see more information on the attacks detected by a particular signature, click the signature type link
Step 2
for that signature. The Signature Events Detail page appears (see
Figure 5-61
This page shows the following information:
•
•
•
Cisco Wireless LAN Controller Configuration Guide
5-114
Figure
Signature Events Summary Page
Signature Events Detail Page
The MAC addresses of the clients identified as attackers
The method used by the access point to track the attacks
The number of matching packets per second that were identified before an attack was detected
5-60).
Chapter 5 Configuring Security Solutions
Figure 5-61).
OL-17037-01