Using The Cli To View Rrm Settings - Cisco 2100 Series Configuration Manual

Chapter 11 Configuring Radio Resource ManagementWireless Device Access

Using the CLI to View RRM Settings

Use these commands to view 802.11a and 802.11b/g RRM settings:
show advanced {802.11a | 802.11b} ?
where ? is one of the following:
•
•
•
•
OL-17037-01
ccx {global | Cisco_AP}—Shows the CCX RRM configuration.
802.11a Client Beacon Measurements:
disabled
channel—Shows the channel assignment configuration and statistics.
Automatic Channel Assignment
Channel Assignment Mode........................ ONCE
Channel Update Interval........................ 600 seconds
Anchor time (Hour of the day).................. 20
Channel Update Count........................... 0
Channel Update Contribution.................... S.IU
Channel Assignment Leader...................... 00:0b:85:40:90:c0
Last Run....................................... 532 seconds ago
DCA Sensitivity Level.......................... MEDIUM (20 dB)
DCA 802.11n Channel Width...................... 40 MHz
Channel Energy Levels
Minimum...................................... unknown
Average...................................... unknown
Maximum...................................... unknown
Channel Dwell Times
Minimum...................................... unknown
Average...................................... unknown
Maximum...................................... unknown
Auto-RF Allowed Channel List................... 36,40
Auto-RF Unused Channel List.................... 44,48,52,56,60,64,100,104,
.......................................... 108,112,116,132,136,140,149,
............................................. 153,157,161,165,190,196
DCA Outdoor AP option....................... Disabled
coverage—Shows the coverage hole detection configuration and statistics.
Coverage Hole Detection
802.11a Coverage Hole Detection Mode........... Enabled
802.11a Coverage Voice Packet Count............ 10 packets
802.11a Coverage Voice Packet Percentage....... 20%
802.11a Coverage Voice RSSI Threshold.......... -75 dBm
802.11a Coverage Data Packet Count............. 10 packets
802.11a Coverage Data Packet Percentage........ 20%
802.11a Coverage Data RSSI Threshold........... -80 dBm
802.11a Global coverage exception level........ 25%
802.11a Global client minimum exception lev. 3 clients
logging—Shows the RF event and performance logging.
RF Event and Performance Logging
Channel Update Logging......................... Off
Coverage Profile Logging....................... Off
Foreign Profile Logging........................ Off
Load Profile Logging........................... Off
Noise Profile Logging.......................... Off
Performance Profile Logging.................... Off
TxPower Update Logging...................... Off
Cisco Wireless LAN Controller Configuration Guide
Configuring RRM
11-23