Configuring Hybrid REAP
Click Wireless to open the All APs page (see
Step 2
Figure 13-5
Click the name of the desired access point. The All APs > Details (General) page appears (see
Step 3
Figure
Figure 13-6
Choose H-REAP from the AP Mode drop-down box to enable hybrid REAP for this access point.
Step 4
Note
Click Apply to commit your changes and to cause the access point to reboot.
Step 5
Click the H-REAP tab to open the All APs > Details for (H-REAP) page (see
Step 6
Figure 13-7
Cisco Wireless LAN Controller Configuration Guide
13-12
All APs Page
13-6).
All APs > Details for (General) Page
The last parameter on the Inventory tab indicates whether this access point can be configured for
hybrid REAP. Only the 1130AG, 1240AG, and 1250 access points support hybrid REAP.
All APs > Details for (H-REAP) Page
Chapter 13
Configuring Hybrid REAPWireless Device Access
Figure
13-5).
Figure
13-7).
OL-17037-01