Cisco 2100 Series Configuration Manual page 668

Configuring Hybrid-REAP Groups
Figure 13-13
To add clients that you want to be able to authenticate using LEAP or EAP-FAST, perform one of
e.
the following:
Note
Click Apply to commit your changes.
f.
Click the Protocols tab to open the HREAP Groups > Edit (Local Authentication > Protocols) page
g.
(see
Cisco Wireless LAN Controller Configuration Guide
13-20
HREAP Groups > Edit (Local Authentication > Local Users) Page
Upload a comma-separated values (CSV) file by checking the Upload CSV File check box,
•
clicking the Browse button to browse to an CSV file that contains usernames and passwords
(each line of the file needs to be in the following format: username, password), and clicking
Add to upload the CSV file. The clients' names appear on the left side of the page under the
"User Name" heading.
Add clients individually by entering the client's username in the User Name field and a
•
password for the client in the Password and Confirm Password fields, and clicking Add to add
this client to the list of supported local users. The client name appears on the left side of the
page under the "User Name" heading.
You can add up to 100 clients.
Figure 13-14).
Chapter 13 Configuring Hybrid REAPWireless Device Access
OL-17037-01