Cisco 2100 Series Configuration Manual page 448

Viewing Clients
Figure 7-28
Check one or more of the following check boxes to specify the criteria used when displaying clients:
b.
•
•
•
•
•
•
c. Click Apply to commit your changes. The Current Filter parameter at the top of the Clients page
shows the filters that are currently applied.
Note
Step 3 To view detailed information for a specific client, click the MAC address of the client. The Clients >
Detail page appears (see
Cisco Wireless LAN Controller Configuration Guide
7-76
Search Clients Page
MAC Address—Enter a client MAC address.
Note When you enable the MAC Address filter, the other filters are disabled automatically.
When you enable any of the other filters, the MAC Address filter is disabled
automatically.
AP Name—Enter the name of an access point.
WLAN Profile—Enter the name of a WLAN.
Status—Check the Associated, Authenticated, Excluded, Idle, and/or Probing check boxes.
Radio Type—Choose 802.11a, 802.11b, 802.11g, 802.11n, or Mobile.
WGB—Shows WGB clients associated to the controller's access points.
If you want to remove the filters and display the entire client list, click Show All.
Figure 7-29).
Chapter 7 Controlling Lightweight Access Points
OL-17037-01