Chapter 10
Managing User Accounts
To create a lobby ambassador account, click New. The Local Management Users > New page appears
Step 2
(see
Figure 10-2
In the User Name field, enter a username for the lobby ambassador account.
Step 3
Note
In the Password and Confirm Password fields, enter a password for the lobby ambassador account.
Step 4
Note
Step 5
Choose LobbyAdmin from the User Access Mode drop-down box. This option enables the lobby
ambassador to create guest user accounts.
Note
Click Apply to commit your changes. The new lobby ambassador account appears in the list of local
Step 6
management users.
Click Save Configuration to save your changes.
Step 7
Using the CLI to Create a Lobby Ambassador Account
Enter this command to create a lobby ambassador account using the controller CLI:
config mgmtuser add lobbyadmin_username lobbyadmin_pwd lobby-admin
Note
Replacing lobby-admin with read-only creates an account with read-only privileges. Replacing
lobby-admin with read-write creates an administrative account with both read and write privileges.
OL-17037-01
Figure
10-2).
Local Management Users > New Page
Management usernames must be unique because they are stored in a single database.
Passwords are case sensitive.
The ReadOnly option creates an account with read-only privileges, and the ReadWrite option
creates an administrative account with both read and write privileges.
Cisco Wireless LAN Controller Configuration Guide
Creating Guest User Accounts
10-3